photo of our carbon fan coil filter for use in spray booths, air conditioning units and heat recovery units

Fan Coil Filter - Carbon

NEW

3542

These Fan Coil filters have a wire frame that holds a carbon impregnated filtration media designed to operate at a very low pressure drop meaning a low restriction to airflow in fan coil units, air conditioning units, heat recovery systems, spray booths and, indeed, anywhere that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.


Size
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Inventory on the way

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

These Fan Coil filters have a wire frame that holds a carbon impregnated filtration media designed to operate at a very low pressure drop meaning a low restriction to airflow in fan coil units, air conditioning units, heat recovery systems, spray booths and, indeed, anywhere that requires air to be filtered but without a particular drop in airflow.

This filter is ideal for use when you require some light smells to be removed from the air that is passing through the panel. This is especially useful when you are recovering or recycling the air that is being filtered.

As the carbon filter has a higher filtration level than many of the fan coil range, if you are using in an area that does contain a high level of dust then it may be useful to have another of the fan coil range to act as a pre-filter and remove the majority of dust which will allow the carbon to concentrate on the smells without getting blocked with the dust.

Frame - wire including support bar/s
Filter - black, carbon impregnated, 3mm
Filter Quality - rated ISO16890 Coarse >40%, G4

Which way around do I fit the filter?
Whilst it may not be really obvious there is a front and a back to this filter. The front just shows the filtration media and the back shows the support bar/s and the stitching holding the filter media in place. The frame should be fitted so that the airflow hits the front of the filter and exits the back.

When should I use the carbon filter?
This Fan Coil filter has a carbon impregnated filtration media so is ideal when you are looking to remove some smells from the filtered air which is especially useful when you are recovering or recycling the filtered are.

You may also like