New Products

Our metal grease filters are designed to be used within commercial kitchens, food preparation & other types of cooking area. Their main function is to reduce the carry over of grease from the cooking area thus reducing the risk of contamination to other areas.

We offer three options for the frame/mesh being stainless steel, aluminium and galvanised steel.  Each filter is supplied with collapsible carry handles to make installation and removal easier, quicker and safer.

These filters can be gently cleaned, to extend their life, by rising with hot water and a mild detergent or being soaked in a mild detergent solution and rinsed in clean water.  The filters must be completely dry before being re-installed into the extraction hood or holding frame. 

Our Profibre spray booth filter rolls are the most common and widely used form of fibreglass filtration. This green & white filtration material is used in many areas both as a primary and as a secondary filter for spray booth extraction as well as for filtering heavy dust and even, in some cases, air entering a booth or product preparation area.

 

Pleated air panels that give energy savings of up to 40% when compared to the use of standard panels.  Minimum order of 4 panels.

This is a disposable pleated panel that is available in a range of sizes and depths.  As an air filter, it has been designed for certain applications, both within manufacturing areas and public buildings, where there may be a high sensitivity to flammability and certain smoke ratings.  Typical installation areas would include: spray booths, product preparation areas, public transport, train stations, public buildings & hospitals.

These panels are normally used for filtering the air entering a spray booth or product preparation area to remove dust particles. An ideal replacement for the standard pleated panels with cardboard frames.  These flexible versions are both stronger and, being completely sealed, will not allow any air to pass between the pleats and frame.

Multiple layers of filtration paper plus a fibre layer. Higher paint holding capacity than fibreglass paint-stop so lasts longer and has better filtration.

This is a 100% polyester roll that is impregnated with activated carbon and is generally used as pre-filters in many different types of filtration application.  If required, this material is easily cut to provide bespoke filter sheets.  G4 & G3 filtration class with a continuous maximum working temperature of 50C.

Water-based protective, peelable floor coating

Pleated panel air filters fitted within a galvanised metal frame.

Laminar Flow panel filters are used for absolute air filtration in controlled contamination environments, installed in terminal filters, safety cabinets and clean rooms. HEPA filters provide a final stage of air filtration in air handling units in buildings requiring a higher level of contamination control. These include hospitals, research laboratories, pharmaceutical manufacturing plants and certain food production facilities.

We only show certain stock sizes however we can made these HEPA filters to any custom size that you require so if you don't see the size that you need please just CONTACT US and we will he happy to discuss your requirements.

These Fan Coil filters have a wire frame that holds a carbon impregnated filtration media designed to operate at a very low pressure drop meaning a low restriction to airflow in fan coil units, air conditioning units, heat recovery systems, spray booths and, indeed, anywhere that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.