These Fan Coil filters have a wire frame that holds a carbon impregnated filtration media designed to operate at a very low pressure drop meaning a low restriction to airflow in fan coil units, air conditioning units, heat recovery systems, spray booths and, indeed, anywhere that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.

These filters have a 12mm deep frame with mesh on both sides to hold the filter pad in place.  Due to the double mesh screen the filter pad can't be changed therefore the filter is not reusable.  If you require a reusable panel then these are available within our Fan Coil collection.

The double mesh is ideal where there is higher airflow or where machine or installation specifications require the fully housed filtration pad.

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These filters have a wire frame that holds a high efficiency synthetic filtration media (ePM10 >70%) designed to balance filtration quality whilst maintaining airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered to a higher quality than our standard Fan Coil Filter.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.

These 12mm thick frames are reusable so when the filter pad is full you simply remove it and install a new one.  This also gives you the ability to change the type of filtration media to suit your needs.

The frame is supplied complete with a filter pad and replacement pads can be ordered separately.

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These 10mm thick pads are for our range of Reusable Fan Coil Filters. When the filter pad is full you simply remove it from the galvanised frame and install a new one. 

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These filters have a wire frame that holds a synthetic, washable filtration media designed to operate at a minimum pressure drop to ensure the lowest possible restriction to airflow in fan coil units, spray booths, air conditioning units etc.  These filters are Classified ISO Coarse 35%, 20ppi. 

Whilst we show a range of sizes we can't show every possible size, so if you don't see the dimensions you require, please just contact us as we can make these frames to your exact measurements.

These filters have a wire frame that holds a synthetic filtration media designed to operate at a minimum pressure drop to ensure the lowest possible restriction to airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.