Collection: Products

Extraction panels for the finest filtration & ideal for absorbing odours & solvent fumes. 1" or 2" thickness.

Polyester impregnated with activated carbon. 3mm & 6mm thickness G4 & G3 filtration quality

Designed for more difficult installation conditions, such as variable air volume, high humidity or exposure to water

Solvent based, white, peelable coating to protect walls etc. within spray booths or other preparation areas.

Water based, peelable coating to protect metals, glass, plastics, porcelain etc within the industrial environment.

Clear, solvent based, peelable coating generally used to protect windows, lights or areas within spray booths.

Pleated input panels that reduce energy usage by up to 40% compared to our standard G4 panels

Slimline frame with carbon impregnated media for fan coil units, air conditioning, spray booths etc

Galvanised frame with mesh both sides to hold filter media. This is not a reusable panel.

Slimline frame with high efficiency synthetic media for fan coil units, air conditioning, spray booths etc

Galvanised frame with filter pad used in all heat recovery & air conditioning units. Replacement pads available.

Replacement filter pads for our Reusable Fan Coil filters.

Washable media with minimum pressure drop so lowest possible restriction to airflow for booths & filter units.

Slimline frame & synthetic media for minimum possible restriction to airflow for fan coil units, air conditioning etc

Pleated polypropylene panels with galvanised frame. Ideal for areas with high humidity. M5-M6 filtration level.

Polypropylene pleated media with a galvanised frame. Ideal for areas with high humidity. F7-F8 filtration level.

Pleated air filter panel designed for applications where both smoke ratings & possible flammability is of concern.

Pleated panels housed within a galvanised metal frame for added strength & security. 1, 2 & 4 inch thickness.

Oiled fibre pad within a cardboard frame for extraction & input air filtration. Large range of sizes available.

Pleated panels with M5 filtration quality. Cardboard frame and a choice of 1", 2" and 4" overall thickness.

Reduce possibility of flames traveling from cooking area into extraction ducting

Best of both worlds with combined mesh & baffle for grease collection & fire safety

Remove grease from ventilation areas within commercial kitchens, food preparation & cooking areas.

The thicker pleats makes for an even better performing HEPA filter whilst increasing the optimal lifespan.

Extra high air flow HEPA filters with 292mm deep, galvanised metal frame & choice of face guard.

HEPA filter with extra high air flow & 292mm deep, galvanised metal frame & choice of face guard.

Metal frame HEPA filter with a narrow frame depth giving very smooth air flow. Range of overall sizes & depths.

HEPA filter with narrow frame depth giving very smooth air flow. Wooden frame in a range of sizes & depths.

For controlled contamination environments, installed in terminal filters, safety cabinets & clean rooms.

NPU (Negative Pressure air filtration Unit) for use when removing Asbestos from buildings.

NPU (Negative Pressure air filtration Unit) for use when removing Asbestos from buildings.

These housings are perfect for the mounting of our range of HEPA filters. Made to measure & standard sizes.

Thicker frame depth giving less smooth air flow but higher flow rate. Metal frame in a range of sizes & depths.

Thicker frame depth giving less smooth air flow but higher flow rate. Wooden frame in a range of sizes & depths.

For HEVAC & general industrial air filtration. Higher filter levels & longer life than the standard pleated panel.

A fine air filter designed for use in environments requiring a high temperature filter.