clear protective coating that can be sprayed on to a surface and can be peeled away when required

Elasticote TR

0134

Clear solvent based protective peelable protective coating that can be used to protect items during transport from scratches and water damage.  Can also be used to protect surfaces such as walls, windows and lights in spray booths or product preparation areas.


Regular price £150.00 Sale price £138.00
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 5 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

ELASTICOTE TR is solvent based and a clear, peelable protective coating. It has many uses including the protection of surfaces such as glass, windows, lights or areas within spray booths or other product preparation areas.

It can be used for the protection of mechanical parts during handling or machining or for applying masks or templates to surfaces prior to paint. It is often used too for protection of parts during transport. It has very good flexibility so can withstand stamping or bending.

Each litre covers 3m2 per litre/kg and takes approximately 20 minutes to dry. Can be applied by spray gun, brush or roller.

DO I HAVE TO APPLY ELASTICOTE TR WITH A SPRAYER?
You can apply Elasticote TR with a sprayer, brush or a roller but, we feel that the best results, and coverage, is obtained when Elasticote TR is sprayed. Spraying is quite often the better way to apply solvent-based products and we recommend this method of application for Elasticote as well.

HOW AM I BEST TO CLEAN MY SPRAYER AFTER APPLYING ELASTICOTE TR?
As Elasticote TR is a solvent based product you can use a solvent based cleaner. We have a specialist cleaner PROCLEAN that is a water-based product that can clean solvent & water-based products. It is also used in very small quantities so a very attractive product for both high and low volume sprayers.

IS IT BETTER TO USE ELASTICOTE TR, ELASTICOTE OR ELASTICOTE AQ FOR MY WALLS?
Elasticote AQ is a water-based coating so you are always better to use this rather than the solvent-based Elasticote or Elasticote TR. However, this does depend on the surface to which you are planning to apply the product to. If you have galvanised surfaces, then you must use Elasticote for a ghost coat as Elasticote AQ will stick to the surface and be hard to remove. So, apply a barrier layer (a very thin coat) of Elasticote then use the Elasticote AQ for subsequent layers. For almost every other surface the Elasticote AQ would be the better product to use.

★★★★★
★★★★★
★★★★★
You may also like