Our metal grease filters are designed to be used within commercial kitchens, food preparation & other types of cooking area. Their main function is to reduce the carry over of grease from the cooking area thus reducing the risk of contamination to other areas.

We offer three options for the frame/mesh being stainless steel, aluminium and galvanised steel.  Each filter is supplied with collapsible carry handles to make installation and removal easier, quicker and safer.

These filters can be gently cleaned, to extend their life, by rising with hot water and a mild detergent or being soaked in a mild detergent solution and rinsed in clean water.  The filters must be completely dry before being re-installed into the extraction hood or holding frame. 

This is a disposable pleated panel that is available in a range of sizes and depths.  As an air filter, it has been designed for certain applications, both within manufacturing areas and public buildings, where there may be a high sensitivity to flammability and certain smoke ratings.  Typical installation areas would include: spray booths, product preparation areas, public transport, train stations, public buildings & hospitals.

These filters have a wire frame that holds a high efficiency synthetic filtration media (ePM10 >70%) designed to balance filtration quality whilst maintaining airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered to a higher quality than our standard Fan Coil Filter.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.

These frames are a 12mm deep with mesh on both sides.  Holding a synthetic filtration media the unit is designed to be used and replaced so is not reusable.  Can be used with all types of airflow units including air conditioning and heat recovery units.

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These frame are a 12mm deep with mesh on one side.  Designed to hold a synthetic filtration pad and be able to replace when necessary but retain the frame.  These frames work with all types of filtration units including air conditioning.  The filtration pad is not included with the frame.

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These filters have a wire frame that holds a synthetic, washable filtration media designed to operate at a minimum pressure drop to ensure the lowest possible restriction to airflow in fan coil units, spray booths etc.  These filters are Classified ISO Coarse 35%, 20ppi. 

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.

These filters have a wire frame that holds a synthetic filtration media designed to operate at a minimum pressure drop to ensure the lowest possible restriction to airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.