Fan Coil Filter - Reusable Frame Pads

3535

These 10mm thick pads are for our range of Reusable Fan Coil Filters. When the filter pad is full you simply remove it from the galvanised frame and install a new one. 

If you don't see the size of filter that you require then please just contact us as we can make these frames to your exact measurements.


Frame Size
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 10 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

These 12mm thick, galvanised frames are reusable so when the filter pad is full you simply remove it and install a new one. This also gives you the ability to change the type of filtration media to suit your needs.

The standard frame is complete with the filter pad and galvanised screen to one side. The screen is designed to hold the pad in place so should be fitted away from airflow meaning that the airflow should hit the pad then the screen as it exits the filter. If it was fitted with the screen facing the airflow it would be possible for the pad to be pushed out of the frame by the airflow.

We can make these Fan Coil filters to almost any size so if you don't see the size that you require then just contact us and we can, very quickly, confirm the price for your exact size.

Filter Pad - Synthetic
Filtration Rate - EN16890 G3 / Course 45%

How do I change the filter pad?

All you need to do is remove the wire support from the face of the filter. This will allow you to easily remove the filter pad and replace with a new one before fitting the support back into the frame.

Reusable Fan Coil Filter Technical Information

You may also like