Fan Coil Filter - WFSS

2301

These filters have a wire frame that holds a synthetic filtration media designed to operate at a minimum pressure drop to ensure the lowest possible restriction to airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered but without a particular drop in airflow.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.


Size
Thickness
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 10 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

These filters have a wire frame that holds a synthetic filtration media designed to operate at a minimum pressure drop so the lowest possible restriction to airflow and used in fan coil units, air conditioning units, spray booths and indeed, anywhere that requires air to be filtered but without a high drop in airflow.

The filter is constructed with wire that is shaped to your exact size requirement. Also, support strips will be added the number of which will depend upon the overall size of the panel. The filter media is fitted over the frame and stitched to ensure it is held securely.

Being only 10mm thick this filter can be used in many different types of environment so whilst they are commonly used in air conditioning and heat recovery units they can also be used within laser cutting installations and other general cooling systems for machinery.

Frame - wire including support bar/s
Filter Type - synthetic
Filtration Quality - ISO course 45%

Will you have stock of the size I need?
We hold stock of the most popular sizes but can't hold stock for every possible size. If we don't have stock of the size you require then manufacture takes around 10 days.

Which way around do I fit the filter?
Whilst it may not be really obvious there is a front and a back to this filter. The front just shows the filtration media and the back shows the support bar/s and the stitching holding the filter media in place. The frame should be fitted so that the airflow hits the front of the filter and exits the back.

You may also like