Fan Coil Filter - High Efficiency

2310

These filters have a wire frame that holds a high efficiency synthetic filtration media (ePM10 >70%) designed to balance filtration quality whilst maintaining airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered to a higher quality than our standard Fan Coil Filter.

If you don't see the size of filter that you require, in the drop down menu, then please just contact us with the size you need as we can make these frames to exact measurements.


Size
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 1 item left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

These filters have a wire frame that holds a high efficiency synthetic filtration media (ePM10 >70%) designed to balance filtration quality whilst maintaining airflow in fan coil units, air conditioning units, spray booths and, indeed, anything that requires air to be filtered to a higher quality than our standard Fan Coil Filter.

Frame - wire including support bar/s
Filter - white, high efficiency
Filter Quality - high efficiency, ePM10 >70%

Which way around do I fit the filter?
Whilst it may not be really obvious there is a front and a back to this filter. The front just shows the filtration media and the back shows the support bar/s and the stitching holding the filter media in place. The frame should be fitted so that the airflow hits the front of the filter and exits the back.

When should I use the high efficiency filter?
The WFSS filter is the most commonly used of our Fan Coil filters as they will stop the larger dirt and dust from entering the area or machine however if you are looking at filtering more dust particles then the High Efficiency Fan Coil Filter is the one that is most suited. They are both the same thickness and whilst the high efficiency will offer a slightly higher air resistance it is still very low compared to many other types of filter and the increased filtration level more than offsets this.

You may also like