Protecsol

Protecsol

0529

Water-based protective, peelable floor coating

Size
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 7 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Protecsol is a water-based, peelable protective floor coating, with ionizing and adherent qualities, for all types of non-porous surfaces in all types of industrial setting.

Protecsol is used for the protection of concrete and resin floors e.g. in spray booths, the protection of tiled floors and walls from paint and varnish, oils, greases, diluted acids, diluted alkaline, cement etc.

Protecsol will protect floors, and other surfaces, from paint overspray and dust as well as from both foot and vehicular traffic.

CHARACTERISTICS

APPEARANCE : opaque white

DRYING : 6 hours at 20 °C

FLEXIBILITY : very good, resistant and peelable

DILUENT : water

COVERAGE: 3-5m2 per litre depending upon surface


METHOD OF USE

NON POROUS CONCRETE OR TILED FLOOR: Apply PROTECSOL in a thick layer with a spatula or roller (approx 500 to 600 microns)

STEEL SURFACE, COATED OR BARE: Apply in a thick layer with a roller or brush (300 to 400 microns) PROTECSOL may be used in areas at high temperatures 70 to 80°C.

Remove after 3 months use. Heavily used and dirtied walkways may be peeled away easily with a light incision and applied again.

Can this really protect my floor from a forklift?

Protecsol will protect your floor from marks that a forklift will leave on floors. It is very important that Protecsol is allowed to dry fully and is kept dry. If the floor becomes wet then it will lift if a forklift turns tight circles upon it.

How to I remove Protecsol?

You simply peel Protecsol from the surface when you want it removed. You can't expect the whole floor to lift in one piece however, if properly applied, then the coating will peel from the surface.

You may also like