Protecnet H

Protecnet H

0138

Clear electrostatic protective coating for surfaces within spray booths, ovens and any other area where dust is a problem.

/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 11 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Protecnet H is an ionised rotective coating that will both attract and hold dust thus stopping it from circulating within air movement.

Once applied to a surface, Protecnet H will dry thus eliminating the possibility of cross contaimination which can be an issue with many wet or tacky protective coatings. This means that Protecnet H is the ideal product for use on surfaces where people may brush over it such as corridors and other walkways.

Water Soluble
Contains no silicone
Non-toxic
Non-flammable
Dries so ideal for use on floors
Heat resistant up to 100oC

With its heat resistance, Protecnet H can be used both within ovens and around the doors of ovens.

What is the difference between Protecnet & Protecnet H?

Both Protecnet products are designed to attract and hold dust or overspray from areas where it is not wanted, they just do it in different ways. Protecnet is a tacky coating meaning that it doesn't dry, it is therefore thicker and can hold more dust. It is very good for use in areas that are subject to very high levels of contamination such as around spray booth filters. However, Protecnet is a tacky coating so it stays wet to the touch and this is where Protecnet H differs as it dries upon a surface. This does mean that it will not have the holding capacity of Protecnet, but it can be used in many more situations and does not have the potential of cross contamination.

How is Protecnet H best applied?

As it is a water-based product, Protecnet H can be effectively applied with either a brush, roller or sprayer. The best method really depends upon the type and size of area to which you are applying it. For most surfaces spraying is a good option as it is quick, and a smooth application can be made. Protecnet H can be used with any of the units within our sprayer range.

★★★★★
★★★★★
★★★★★
You may also like