Protop 500 Air Input Filter

Protop 500 Air Input Filter

0236

The most important filtration within an enclosed spray booth or preparation area is the filtration of the air ENTERING the booth. This element is quite often forgotten, however filtering the air going into the booth is vital for the quality of the finished item.

 


Size
Regular price £151.77
/
+ VAT

Thanks for subscribing

The folded 'accordion' design, of this Procart B spray booth filter, ensures a high paint holding capacity whilst maintaining maximum airflow for much longer than many types of air filtration alternatives such as fibreglass rolls. Our spray booth filters will ensure that air, from your product finishing area, is filtered effectively.

This Procart spray booth filter is designed to filter all types of water and solvent based paints and other types of coating but not powder paints or dust (for this we recommend the use of our Procart M2 or Procart H booth filters). With this design of paper filter your overspray is captured on both on the face of the filter and within the folds which allows the booth air to pass through the filter with minimal obstruction until full, thus a constant, smooth airflow is maintained for much longer than using other types of extraction filtration. What is so important about airflow? Without it you don't have a proper functioning spray booth and you won't be able to produce a proper finish so a good airflow is vital to the running of your spray booth.

If you are looking to spray powder or very dry or dusty paints or feel that your spray booth may suffer from a high percentage of overspray or you are experiencing problems with dust or paint traveling through your ducting and ending up outside of your factory then you may want to look at the other options within our Filtration range or feel free to call us on 01673 895130 or email us for further assistance.

If you require a non-standard size then simply select the closest standard size larger than your required size. During the check-out process you can complete your required size in the box for special requests. If you would prefer to tell us your requirements then this is fine however you can still purchase your filters here.

  • Hurry, only 3 items left!

  • cash
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

This is an absolute must with many types of booth especially spray bake ovens, car body shops and the painting of high gloss finishes. This roll is not impregnated nor has a scrim so differs from our Protop 600 which has these additions.

We can offer a very special cutting service where we will cut the fibre to your size. If a 20-metre roll is just far too much for you then we can cut to your specific requirements. All you need to do is purchase the number of metres you require (the price given is per metre) and we will do the rest. The size you are paying for is 1-metre x 1-metre lengths so if you would like 1 x 2-metre length then place your order for 2 pieces and in Special Instructions just state that you require one 2-metre length (it will be cut at 1 x 2-metres). It's as simple as that.

What difference does it make that this material doesn't include the gel?

Firstly, the choice as to whether you have this product or our Protop 600 (which is impregnated with a clear gel) is entirely yours and what your preferences are. Approximately 40% of our customers prefer this product with the 60% going for the Protop 600. The whole point of impregnating the Protop 600 is that gel will allow the material to hold on to more of the collected dust when subjected to vibration such as when the air extraction fans are started or stopped.

You may also like