Collection: Reusable Filters

Remove grease from ventilation areas within commercial kitchens, food preparation & cooking areas.

HEPA filter with narrow frame depth giving very smooth air flow. Wooden frame in a range of sizes & depths.

Metal frame HEPA filter with a narrow frame depth giving very smooth air flow. Range of overall sizes & depths.

Pleated air filter panel designed for applications where both smoke ratings & possible flammability is of concern.

Extraction panels for the finest filtration & ideal for absorbing odours & solvent fumes. 1" or 2" thickness.

Pleated panels housed within a galvanised metal frame for added strength & security. 1, 2 & 4 inch thickness.

Best of both worlds with combined mesh & baffle for grease collection & fire safety

Designed for more difficult installation conditions, such as variable air volume, high humidity or exposure to water

Thicker frame depth giving less smooth air flow but higher flow rate. Metal frame in a range of sizes & depths.

For controlled contamination environments, installed in terminal filters, safety cabinets & clean rooms.

Reduce possibility of flames traveling from cooking area into extraction ducting

Pleated polypropylene panels with galvanised frame. Ideal for areas with high humidity. M5-M6 filtration level.

Slimline frame & synthetic media for minimum possible restriction to airflow for fan coil units, air conditioning etc

Replacement filter pads for our Reusable Fan Coil filters.

Galvanised frame with filter pad used in all heat recovery & air conditioning units. Replacement pads available.

Suitable for a wide range of lower energy seeking installations. Even better performance against smaller particle sizes in the ePM range.

Thicker frame depth giving less smooth air flow but higher flow rate. Wooden frame in a range of sizes & depths.

NPU (Negative Pressure air filtration Unit) for use when removing Asbestos from buildings.

Suitable for a wide range of installations where lower energy usage is a priority. 20mm frame thickness.

These housings are perfect for the mounting of our range of HEPA filters. Made to measure & standard sizes.

NPU (Negative Pressure air filtration Unit) for use when removing Asbestos from buildings.

HEPA filter with extra high air flow & 292mm deep, galvanised metal frame & choice of face guard.

Extra high air flow HEPA filters with 292mm deep, galvanised metal frame & choice of face guard.

The thicker pleats makes for an even better performing HEPA filter whilst increasing the optimal lifespan.

Polypropylene pleated media with a galvanised frame. Ideal for areas with high humidity. F7-F8 filtration level.

Washable media with minimum pressure drop so lowest possible restriction to airflow for booths & filter units.

Slimline frame with high efficiency synthetic media for fan coil units, air conditioning, spray booths etc

Galvanised frame with mesh both sides to hold filter media. This is not a reusable panel.

Slimline frame with carbon impregnated media for fan coil units, air conditioning, spray booths etc